VSK Global    
ProductSearch:  
 
   Products
  Power Capacitor
  Controller
  Switching Switch
  Filter Module
  Surge protective
  Filter Reactor
  Active Filter
  Medium voltage
·Cooperation
·Link
·Contact
·Home
 
■Subordinate Type: Power Capacitor

Specification Parameter
ProductName:Self healing low voltage shunt capacitor for power system
ProductType:VSKC
Time:2007/4/16
Hits:965
  Introduce Detailedly    

VSK series power system with self-healing capacitor with high resistance current and dielectric properties of good Zn Al composite polypropylene dielectric film is used as the main material. The introduction of technology, Germany's most advanced production equipment, strictly in accordance with national standards and international standards IEC production. Mainly used in low voltage power network to improve power factor, reduce line losses, improve the quality of voltage, the state recommended a new type of energy-saving environment-friendly products using the low voltage switchgear of the joint design to develop product selection.



Main technical parameter
1, the use of conditions: ambient temperature -25 degrees C, ~+50 degrees, humidity is less than 85%RH, elevation: 2000 meters below
2, rated voltage: 230VAC, 250VAC, 280VAC, 400VAC, 415VAC, 430VAC, 440VAC, 450VAC, 480VAC, 525VAC, 690VAC, 1050VAC, 730VAC, and
3 、 rated capacity: 1-VAR
4, capacity deviation: 0~+10%
5. Loss tangent: less than 0.12%
6, voltage performance: extreme 2.15un10 seconds, polar shell 3000VAC10 seconds
7, self discharge performance: three minutes plus V 2un DC voltage capacitor is disconnected from the power supply, the remaining voltage is below 50V
8. Protection device: enclosed safety anti riot device
9, number of phase and connection: three-phase delta connection method (Y method)
10 、 allow the highest over-voltage current: less than 110% of the rated voltage, less than 130% of the rated current (should be paid enough attention to ensure continuous operation in the specified value state)
11, insulation: all terminal shell 3000M
12, meet the standards: GB/T12747-2004, IEC60831-2002, EN60831-1,2, VDE0560-46,47

main features
1, the use of current resistant zinc aluminum composite polypropylene film as the main material, with low resistance to over-current impact and reduce dielectric loss and capacity attenuation characteristics.
2, select the best international semi solid composite flexible dipping material, non-toxic, environmental protection, drop point of melting point higher than 70 degrees, with high strength insulation and thermal performance, as well as flame retardant, explosion-proof performance.
3, the selection and design of corrugated membrane webbing cutting process, ensure the stability of capacitance in high current and high temperature.
4, the use of a unique coating process, greatly improving the resistance to flow capacity of capacitors, effectively extending the service life of capacitors.
5, the use of ultra-low loss pure zinc spraying process, with a strong spray end adhesion, and solder joints solid and low contact loss characteristics.
6 、 select the most advanced internal mechanical pressure insurance, current overload insurance double insurance device, with a special ability to prevent shell burst, and completely eliminate the possibility of accidents.
7, the use of the latest type of discharge device, can make the capacitor on the electric energy automatically discharged, to ensure the use of electricity and maintenance safety.
8, excellent self-healing performance, with insulation, self function, over-voltage caused by local breakdown of the medium, can quickly self-healing, to resume normal work, so that reliability greatly improved.
9, the selection of the latest international structure, process design, product features and modeling reflects the modern logo.

Main specifications

 Specifications
Rated voltage KV
Rated capacity
kvar
Rated capacitance
μF
 Rated current
A
high
Outgoing terminal
Figure No. 
 VZMJ0.4-1-3
0.4 
 1
20 
1.4 
140 
M6 
 VZMJ0.4-3-3
0.4 
 3
 60
 4.3
 140
 M6
 1
 VZMJ0.4-5-3
0.4 
 5
 100
 7.2
 140
 M6
 1
 VZMJ0.4-6-3
0.4 
 6
 119
 8.7
 140
 M6
 1
 VZMJ0.4-7.5-3
 0.4
 7.5
 149
 10.8
 140
 M6
 1
 VZMJ0.4-8-3
 0.4
 8
 159
 11.6
 140
 M6
 1
 VZMJ0.4-10-3
 0.4
 10
 199
 14.4
 180
 M6
 1
 VZMJ0.4-12-3
 0.4
 12
 239
 17.3
 180
 M6
 1
 VZMJ0.4-14-3
 0.4
 14
 279
 20.2
 220
 M6
 1
 VZMJ0.4-15-3
 0.4
 15
 299
 21.7
 220
 M6
 1
 VZMJ0.4-16-3
 0.4
 16
 319
 23.1
 220
 M6
 1
 VZMJ0.4-18-3
 0.4
 18
 358
 26
 250
 M6
 1
 VZMJ0.4-20-3
 0.4
 20
 398
 28.9
 250
 M6
 1
 VZMJ0.4-25-3
 0.4
 25
 497
 36.1
 220
 M8
 2
VZMJ0.4-30-3
 0.4
 30
 597
 43.3
 270
 M8
 2
 VZMJ0.4-40-3
 0.4
 40
 796
 57.7
 330
 M8
 2
 VZMJ0.4-50-3
 0.4
 50
 995
 72.2
 270
 M10
 3
 VZMJ0.415-3-3
 0.415
 3
 55.5
 4.17
 140
 M6
 1
 VZMJ0.415-5-3
 0.415
 5
 92
 7.0
 140
 M6
 1
 VZMJ0.415-8-3
 0.415
 8
 147.9
 11.1
 140
 M6
 1
 VZMJ0.415-10-3
 0.415
 10
 185
 13.9
 180
 M6
 1
 VZMJ0.415-12-3
 0.415
 12
 222
 16.7
 180
 M6
 1
 VZMJ0.415-14-3
 0.415
 14
 259
 19.5
 220
 M6
 1
 VZMJ0.415-15-3
 0.415
 15
 277
 20.9
 220
 M6
 1
 VZMJ0.415-16-3
 0.415
 16
 296
 22.3
 220
 M6
 1
 VZMJ0.415-18-3
 0.415
 18
 333
 25.0
 250
 M6
 1
 VZMJ0.415-20-3
 0.415
 20
 370
 27.8
 250
 M6
 1
 VZMJ0.415-25-3
 0.415
 25
 462
 34.8
 220
 M8
 2
 VZMJ0.415-30-3
 0.415
 30
 555
 41.7
 270
 M8
 2
 VZMJ0.415-40-3
 0.415
 40
 739
 55.7
 330
 M8
 2
 VZMJ0.415-50-3
 0.415
 50
 924
 69.6
 270(320)
 M10
 3
 VZMJ0.44-3-3
 0.44
 3
 49.3
 3.9
 140
 M6
 1
 VZMJ0.44-5-3
 0.44
 5
 82.2
 6.6
 140
 M6
 1
 VZMJ0.44-8-3
 0.44
 8
 132
 10.5
 140
 M6
 1
 VZMJ0.44-10-3
 0.44
 10
 164.5
 13.1
 180
 M6
 1
 VZMJ0.44-12-3
 0.44
 12
 197.4
 15.75
 180
 M6
 1
 VZMJ0.44-14-3
 0.44
 14
 230.3
 18.4
 220
 M6
 1
 VZMJ0.44-15-3
 0.44
 15
 247
 19.7
 220
 M6
 1
 VZMJ0.44-16-3
 0.44
,
 16
 263,
 21.0
 220
 M6
 1
 VZMJ0.44-18-3
 0.44
 18
 296
 23.3
 250
 M6
 1
 VZMJ0.44-20-3
 0.44
 20
 329
 26.2
 250
 M6
 1
 VZMJ0.44-25-3
 0.44
 25
 411
 32.8
 220
 M8
 2
 VMJ0.44-30-3
 0.44
 30
 493
 39.4
 270
 M8
 2
 VZMJ0.44-40-3
 0.44
 40
 658
 52.5
 330
 M8
 2
 VZMJ0.44-50-3
 0.44
 50
 823
 65.6
 270
 M10
 3
 VZMJ0.45-3-3
 0.45
 3
 47.2
 3.85
 140
 M6
 1
 VZMJ0.45-5-3
 0.45
 5
 79
 6.4
 140
 M6
 1
 VZMJ0.45-8-3
 0.45
 8
 125.8
 10.3
 140
 M6
 1
 VZMJ0.45-10-3
 0.45
 10
 157
 12.8
 180
 M6
 1
 VZMJ0.45-12-3
 0.45
 12
 188.7
 15.4
 180
 M6
 1
 VZMJ0.45-14-3
 0.45
 14
 220
 17.9
 220
 M6
 1
 VZMJ0.45-15-3
 0.45
 15
 236
 19.2
 220
 M6
 1
 VZMJ0.45-16-3
 0.45
 16
 252
 20.5
 220
 M6
 1
 VZMJ0.45-18-3
 0.45
 18
 283
 23.0
 250
 M6
 1
 VZMJ0.45-20-3
 0.45
 20
 314
 25.7
 250
 M6
 1
 VZMJ0.45-25-3
 0.45
 25
 393
 32.1
 220
 M8
 2
 VZMJ0.45-30-3
 0.45
 30
 472
 38.5
 270(250)
 M8
 2
 VZMJ0.45-40-3
 0.45
 40
 629
 51.3
 330
 M8
 2
 VZMJ0.45-50-3
 0.45
 50
 786
 64.2
 270
 M10
 3
 VZMJ0.45-60-3
 0.45
 60
 943
 77.0
 320
 M10
 3
 VZMJ0.48-5-3
 0.48
 5
 69.1
 6.0
 140
 M6
 1
 VZMJ0.48-10-3
 0.48
 10
 138.2
 12.0
 180
 M6
 1
 VZMJ0.48-15-3
 0.48
 15
 207.3
 18.0
 220
 M6
 1
 VZMJ0.48-20-3
 0.48
 20
 276.5
 24.0
 250
 M6
 1
 VZMJ0.48-25-3
 0.48
 25
 345.6
 30.0
 220
 M8
 2
 VZMJ0.48-30-3
 0.48
 30
 415
 36.0
 250(270)
 M8
 2
 VZMJ0.525-5-3
 0.525
 5
 58
 5.5
 140
 M6
 1
 VZMJ0.525-10-3
 0.525
 10
 116
 11.0
 180
 M6
 1
 VZMJ0.525-15-3
 0.525
 15
 173
 16.5
 220
 M6
 1
 VZMJ0.525-20-3
 0.525
 20
 231
 22.0
 250
 M6
 1
 VZMJ0.525-25-3
 0.525
 25
 289
 27.5
 220
 M8
 2
 VZMJ0.525-30-3
 0.525
 30
 347
 33.0
 250(270)
 M8
 2
 VZMJ0.525-40-3
 0.525
 40
 462
 44.0
 330
 M8
 2
 VZMJ0.525-50-3
 0.525
 50
 578
 55.0
 270
 M10
 3
 VZMJ0.525-60-3
 0.525
 60
 693
 66.0
 320
 M10
 3
 VZMJ0.69-5-3
 0.69
 5
 34
 4.2
 140
 M6
 1
 VZMJ0.69-10-3
 0.69
 10
 67
 8.4
 180
 M6
 1
 VZMJ0.69-15-3
 0.69
 15
 100
 12.6
 220
 M6
 1
 VZMJ0.69-20-3
 0.69
 20
 134
 16.7
 250
 M6
 1
 VZMJ0.69-25-3
 0.69
 25
 167
 20.9
 220
 M8
 2
 VZMJ0.69-30-3
 0.69
 30
 201
 25.1
 250(270)
 M8
 2
 VZMJ0.69-40-3
 0.69
 40
 268
 33.5
 330
 M8
 2
 VZMJ0.69-50-3
 0.69
 50
 334
 41.9
 270(320)
 M10
 3
VZMJ1.2-10-3
 1.2
10
 22
 4.8
 220
 M6
 1
 VZMJ1.2-15-3
 1.2
 15
 3, 3
 7.2
 270
 M6
 1

 


 
  Shopping Vehicle  

       Amount of the order:    

         



Copyright ©1999-2009. Tianjin VSK Enterprise All rights reserved.
http://www.vskcn.com e-mail:vsk@vskcn.com